Injection / Feeding / Dosing
 
 
List of Injection / Feeding / Dosing
Exciting of beers is making beer foam. As the bottles advance through the assembly line they are filled with beer.Just before they are capped, they are charged with a high pressure shot of water, which causes the beer to foam or excite. more...
On the 16th floor of a detroit office building are nine boilers in operation to provide both the heating and cooling requirements of the building occupants. Normally the boilers are fired by natural gas, however, during extreme weather conditions more...
High pressure water jet pumps are used to transfer of crude oil (from the well site to storage tanks).During transfer of oil, there will be pressure lost in the line due to long route and hence high pressure is essential to complete the task. more...
High pressure water jet pumps are used to transfer of crude oil (from the well site to storage tanks).During transfer of oil, there will be pressure lost in the line due to long route and hence high pressure is essential to complete the task. more...
Golf course greens, tee boxes, and fairways suffer the adversities of compaction and heat stress. Aeration and liquid volume injection provide an economical solution to this problem. more...
In Oleochem industries, oil (vegetable oil, etc.) is to be splitted and converted into crude fatty acid. This oil splitting process requires counter flow of oil and water at high temperature and pressure. more...
triplex plunger pump which is PTO driven of the tractor to deliver 53 lpm at 155 bar to seven injection arms can be installed to provide an effective & economical no-till fertilizer applicator. These arms , each have a pivotal foot to adjust more...
Messer Pest Control Inc. of Des Moines, Iowa offers termite control and protection for homes and buildings in the Des Moines area.The original method required digging around the foundation, drilling a series of holes through more...
Repeated and costly downtime of an existing 757 bar (200 gpm) pump, delays in securing replacement parts for this pump and a desire to reduce energy consumption provided yet another opportunity for PressureJet pump to prove its performance more...
Flooding is the least expensive and simplest method of enhanced recovery. It makes use of the unwanted waste water which accompanies the oil pumped from the ground, eliminates expensive chemicals or steam heating more...
O’Conner Engineering Company created this ship as ascale model of the historic Pacific Northwest Tug “Tattose”. This tug was christened “Well Stacked” and was designed and used by O’Conner Engineering todemonstrate the feasibility of steam powered more...
When diving chambers (under sea vessels) are below sea level, it is necessary to keep the water supply pressurized at 10% above external sea water pressure. At 1000 feet, which is the maximum diving depth of the more...
In the process of bringing crude oil out of the ground, a large quantity of salt water or brackish water is also brought up. In the past, this water was dumped on the surface of the ground. Today, due to EPA controls, another means of disposal has been developed. more...
Industrial and institutional launderers and textile manufacturers have a need to remove excess water from washed fabric to reduce the dry time and energy costs.At this blanket manufacturer, the washed blankets are more...
copyright © 2008 | All Rights reserved | Pressurejet