Sewer cleaning & Drain jetting

Click to make an enquiry

 Sewer Jetting Rotating Nozzle

 

For technical and sanitary reasons, sewer cleaning equipment is frequently required. Particularly, the blocking of the cross sections as well as odor problems need to be avoided. Also, damages at the channel walls must be recognized very early, which is only possible, if the walls are completely clean. Further, inorganic deposits that reduce the sewage treatment efficiency must be removed.

 

Sewer cleaners / gutter cleaner is the process of using high pressure and water to bring a sewer drain line back to like-new condition without having to actually replace the line. This is very cost-effective practice, as well as a nearly effortless task- especially for sewer drain jetting that are heavily used, even for grease. (You aren't supposed to be dumping that down there in the first place!)

 

Anyone, who has ever had to deal with a sewer or even residential septic tank, knows all about clogs and back-ups. Soap scum residue, grease, hair, food, mineral deposits and more can all cause a drain to back up. As much as people try to be careful with what they send down the tube, it is almost inevitable that these things will at some time pass through eventually causing clogs. Even as careful as you are with grease- you may not directly dump it down the drain- but the remaining grease on pots, pans and plates can cause a film that over the years can build up and solidify. Sometimes a simple unclogging could do but after masses of build-up and too frequent blockages, perhaps a good sewer jetting system would be a more effective method that will also last plenty longer.

 

PressureJet high pressure sewer drain jetting pumps are completely suitable to achieve all above cleaning results, because these pumps are rugged in construction, have medium speed and perform to the entire satisfaction of the customer.

 

There is special pressure washers designed specifically for this purpose, called sewer jetters. They can clean the pipes leading from sinks and bathtubs leading to the tanks, even those at long distances, which is especially helpful in the case of industrial piping. The sewer drain jetters work at a high pressure, between 150-300 bar and 12-400 lpm. The pressure can be adjusted throughout the job as needed. These machines use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways. This essentially scours the pipes clean and then washes the debris back up to be removed, usually through a vacuum pump.

 


These kinds of systems are successfully running in different municipal corporations.

 

WHAT SIZE DRAIN JETTER HOSE DO I USE?

1" - 4" pipe lines use 1/8" size drain cleaning hose
2" - 6" pipe lines use 1/4" size drain cleaning hose
5" - 10" pipe lines use 3/8" size sewer jetting hose
8" - 12" pipe lines use ½" size sewer cleaning hose
10" or larger pipe lines use ¾" size sewer blasting hose

 

IMPORTANT ACCESSORIES FOR SEWER CLEANING & DRAIN JETTING SYSTEM

  • Different types of specially designed drain cleaning nozzles
  • High pressure sewer jetting hose
  • Hose reel
  • Hydraulic hose reel
  • Camera

SEWER CLEANING & DRAIN JETTING SYSTEMS OF PRESSUREJET


Sr. No.
System
Flow Rate
Pressure (bar)
Motor (hp)
1
14
140
5
2
21
200
12.5
3
30
190
15
4
40
140
15
5
115
120
40
6
80
180
40
7
61
180
30
8
58
150
25
9
70
150
30
10
91
150
40
11
115
120
40
12
110
100
30
13
139
100
40
14
KG 50-155-120
155
175
75
15
KB 40-145-250
145
250
100
16
KD 40-170-325
170
325
150

 

QUESTIONNAIRE FOR SEWER CLEANING PUMP (PDF / PRINT VERSION).

pdf.jpg

 

 Click to make an enquiry
 
 
copyright © 2008 | All Rights reserved | Pressurejet